Westinghouse LD-3240 - Manual (Page 15)

-14-
OPERATION
1). Air/Cable: select Air TV signal and cable TV signal.
2). Auto Scan: If it's the first time you use the TV, you
should scan all the TV channels first,
press the
button to confirm, you will see the
menu:
select yes item and “ ” press the ENTER button to
confirm, You will see the message below which
indicates auto search is in process.
3). Favorite: Press button to choose/delete the
favorite channel .
4). Show/Hide: Press button to display or hide
current channel.
5). Channel NO. :Display the current channel number.
6). Channel label: Press
button to edit current channel
name.
7). DTV signal: Display DTV strength signal. It can't be
selected and adjusted.
3.5 VGA Settings: When PC Mode is available.
1).H-Pos: Adjust the horizontal position of the screen.
2).V-Pos: Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
5).Auto: Auto adjust to fit the screen.
Press button to select VGA Settings, Press
button, the screen will display as follow:
4. Channel MENU
The fourth item of the MENU is Channel MENU.
You can adjust digital and analog TV Channels.
Press
to select, press to adjust.
3.4 Menu Settings
You can adjust the Menu Settings here.
Press
to select, press to adjust, press MENU
to exit.