Westinghouse LCM-20v5 - Manual (Page 11)

ENGLISH
10
3. Connect Power Cables
Connect the AC power cord to the LCD Monitor (to the connector labeled “AC-IN”) and
then connect the cord into a properly grounded AC outlet.
4. Turn the Power On
Press the power button on the side of the LCD monitor. The LED light will turn green if
a signal input is detected or it will be orange if no input is detected.
NOTE:
If you have a problem with the video image, adjust the computer’s resolution
to 1400 x 1050 or turn off and reboot the computer. In addition, you may need to
download the latest drivers for the graphics card used in your computer.