Whistler 1770 - Manual (Page 11)

Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press the City and Quiet buttons simultaneously and
release. Display reads:
• Press the Power button to exit.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off
your detector within 3 hours if you forget to turn it off. The
timer is reset if the detector is turned off, unplugged or
any button is pressed before the 3 hours have expired. The
detector will alert you with an audible and visual warning
before it shuts off. Display reads:
During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.
If the unit has automatically turned itself off, press the
Power button to turn the unit back on. You can manually
engage the Vehicle Battery Saver Mode by pressing and
holding the City button until one beep is heard.
Refer to “Option Select Mode” for instructions for deacti-
vating battery saver mode feature.
OPERATION
18
OPERATION
19
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, NOAA Select, Abbreviated
Power Up Sequence and VG-2 Mode. When selecting
options, the , or Quiet must be pressed within 20 sec-
onds or options mode will automatically be exited. To enter:
Press : *Display To Change, Option:
Quiet Reads: Press
For 2 seconds COMBO or NWR STBY=Radar & NOAA
NWR on=NOAA & Radar
NWR off=Radar Only
2nd time SQ ON = ON Squelch ON
= OFF Squelch OFF
3rd time TONE 3 = YES Tone 1, 2, or 3
= NO (3 different X, K, Ka
patterns)
4th time Test = ON X,K,KA Audio tones
ON = OFF 1 beep during Power Up
5th time X = ON X Band On
ON
= OFF
X Band Off
6th time K = ON K Band On
ON
= OFF
K Band Off
7th time Ka = ON Ka Band On
ON
= OFF
Ka Band Off
8th time LASER = ON Laser On
= OFF
Laser Off
9th time VG-2 OFF = ON Turns VG-2 On
= OFF
Turns VG-2 Off
10th time SR = ON Turns Safety Radar On
ON = OFF Turns Safety Radar Off
11th time VOICE = ON Real Voice engaged
ON = OFF Real Voice disengaged
12th time B SVR = ON Battery Saver On
ON = OFF Battery Saver Off
*Factory settings.
Press power anytime to exit.