Adjusting the weider pro 635 – Weider 831.150390 User Manual

Page 12

Advertising
background image

12

ADJUSTING THE WEIDER PRO 635

The weight bench is designed to be used with your own weight set (not included). The steps below explain how
the weight bench can be adjusted. See EXERCISE GUIDELINES on page 14 for important exercise information
and refer to the accompanying exercise poster to see the correct form for each exercise. Refer also to the exer-
cise information accompanying your weight set for additional exercises.

Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.

ATTACHING WEIGHTS TO THE WEIGHT CARRIAGE

To use the lat tower, first slide a Weight Stop (19) onto
each side of the weight tube of the Weight Carriage (56).
Slide the desired amount of weight (not included) onto the
weight tube. Be sure that an equal amount of weight is on
each side of the weight tube. Secure the weights on each
side of the weight tube with a Spring Clip (34).

Do not place more than 150 pounds on the Weight
Carriage. (Due to the fact that ab crunches are an aer-
obic exercise, we recommend that you do not place
more than 50 pounds on the Weight Carriage while
performing ab crunch exercises.)

ATTACHING WEIGHTS TO THE LEG LEVER

To use the Leg Lever (28), slide the desired amount of
weight (not included) onto the weight tube.

If you are using olympic weights, slide the Olympic
Adapter (58) onto the Leg Lever (28) before sliding any
weight onto the Leg Lever.

Do not place more than 150 pounds on the Leg Lever.

ADJUSTING THE BACKREST

The Backrest (36) can be set at three different positions:
the level position, the decline position, and the incline posi-
tion.

To change the position of the Backrest (36), remove the
“L”-Pin (50) from the Adjustment Bracket (51) and the
Bench Frame (39). Set the Backrest to the desired posi-
tion, align the holes in the Adjustment Bracket and the
Bench Frame, and re-insert the “L”-Pin.

Weight

Weight

Weight

Tube

34

34

56

28

36

39

19

Weight

58

19

Weight

Tube

50

51

Advertising