Wright 54700 and higher - Manual (Page 12)

11
Critical Application
Thread
Locker
Torque Range
(ft-lbs)
Wheel motor bolts (Securing motor to support) Loctite 2760 40-50
Clutch to engine shaft Loctite 2760 50-55
Wheel hub to wheel motor N/A 175-225
Wheel lug nuts N/A 80-90
Split Hub (Spindle & Drive) (Gr 8) N/A 13-17
Torque Specifications
2 Specifications
Engine
•
See your engine owner’s manual
•
RPM: Full speed 3600 +/- 50 RPM (no load) / Idle: 1550 RPM
Electrical System
•
Charging System: Internal stator coil
•
Battery Type: Maintenance free
•
Battery Voltage: 12 Volts
•
Fuses: Two, 20 amp blade type
Fuel System
•
Capacity: 5.6 Gal.
•
Type of Fuel: Unleaded regular gasoline, minimum 85 octane. Do not use gasoline containing more
than 10% ethanol. Do not mix oil with gasoline.
•
Fuel Filter: In line
•
Fuel shut off: On, Off located on fuel tank
Safety Interlock System
•
PTO switch must be disengaged, brake engaged and the control handles in the neutral and locked
position to start the engine.
•
Operator must have feet on the platform to engage the PTO and brake off or engine will stop.
Drive System:
•
Two Hydro Gear 12cc variable displacement piston pumps w/fans
•
Two Hydro Gear 15 cu in. wheel motors
Hydro Oil System
•
Hydro Oil: fully SYNTHETIC motor oil: Mobil-1 15W-50
•
Hydro Filter: Spin-on, 25 micron, no bypass / PN 34490002
•
Total Capacity: 3 qts
•
Tank Fill Level: Fill until fluid comes from fill port.