Wells WV-FGRW - Manual (Page 17)

INSTALLATION (continued)
15
CAUTION:
Burn Hazard
DO NOT OPERATE UNLESS
THE GREASE DRIP TRAY
IS INSTALLED.
Moisture will drip into the hot
cooking surface causing
splattering of hot liquids.
Serious injury can result from
contact with hot splatter.
GREASE DRIP TRAY INSTALLATION
1. Install the GREASE DRIP TRAY on the hanger brackets, directly
below the grease baffle.
INSTALL COOKING APPLIANCE COMPONENTS
1. FRYER COMPONENTS
a. Raise the fryer ELEMENT HEAD and install FRYPOT.
b. Using the BASKET RACK as a handle, lift the ELEMENT HEAD
slightly, Then rotate the spring-loaded SUPPORT ROD forward.
Lower the ELEMENT HEAD into the FRYPOT.
c. Hang the FRYER BASKETS on the BASKET RACK.
2. If appliance is equipped with the optional warmer drawers:
a. Install WARMER PANS on warmer drawer rails.
b. Insert Humitrol racks (if provided).
Fig. 8 Fryer Component Installation
Fig. 9 Roll Warmer Drawer Pan Installation