Operating instructions, Connection and use, Recharging your electric wine opener – Waring WO50 User Manual

Page 5: Foil cutter

Advertising
background image

4

OPERATING INSTRUCTIONS

CONNECTION AND USE

We recommend that you charge your electric wine opener for at

least eight hours before using for the first time. Please follow the

instructions for recharging as stated below:

RECHARGING YOUR ElECTRIC WINE OPENER

Plug one end of the adapter cord into the base of the recharging

base and the other end into an electrical outlet. Place the

electric wine opener into the recharging base, making sure

that it is firmly in position and that it is fully engaged with the

recharging connection. A green charge light will flash indicating

that the unit is charging. It will take approximately 6-8 hours

to recharge your electric wine opener. When your electric wine

opener is fully recharged, the green light will stop flashing and

become a solid green light.
Your wine opener can open approximately 80 bottles of wine

on a full charge.

FOIl CUTTER

For your convenience, this unit has a removable foil cutter,

which is stored in the base of the unit.

Before removing the cork, you must re-

move any foil from the bottle (see fig ).

Attach foil cutter to the top of the wine

bottle. Keep hand on lower part of bottle

and turn foil cutter in twisting motion

to remove foil. Remove foil to expose top

part of cork surface.
CAUTION: Blade on foil cutter is sharp. Please keep fingers

away from cutter's sharp edges.

TO OPERATE YOUR WINE OPENER

Press the lower part of the switch (indicated

by a down arrow) to remove a cork from the

bottle. Press the upper part of the switch

(indicated by an up arrow) to release a cork

from the mechanism after you have removed

the cork from the bottle (see fig 2).

(fig )

(fig 2)

Advertising