weber GENESIS 55827 - Manual (Page 16)

16
SIDE BURNER TROUBLESHOOTING
SIDE BURNER MAINTENANCE
ƽWARNING: All gas controls and supply valves
should be in the OFF position.
Make sure black wire is connected between the igniter and electrode
(1). Make sure white wire is connected between the igniter and
grounding clip
(2). Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Ground wire
3) Burner
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
PROBLEM CHECK CURE
Side Burner does not light. Is gas supply off? Turn supply on.
Flame is low in HIGH position Is the fuel hose bent or kinked? Straighten hose.
Push button ignition does not
work. Does burner light with a match? If match lights burner, check igniter (see below).
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area
using the contact information on our web site. Log onto www.weber.com
® .
(1)
(2)
(1)
(2)
(3)