Wolfgang Puck WPIB0010C - Manual (Page 5)

8
Suggested Uses
Your Immersion Blender comes with a fixed multi-purpose blade,
and an extra long shaft which allows the unit to be used in deep pots,
or tall containers.
Caution: Blades are sharp. Handle with care.
Functions Speed
Beat cream, whip egg whites,
puddings, sauces, frostings and
other airy, foamy mixtures. When
using, move blending rod up and
down to draw air in. Use a tall,
narrow container for best results
when foaming milk, making cream
and whipping egg whites.
Mix and stir shakes, drinks, omelet
batters, sauces and emulsions. Use
for pancake batter, gravies and
dressings.
Cut, chop, and crush raw or cooked
meat and hard vegetables.Grind
cooked meat for use in recipes such
as casseroles or chicken salad.
Chop, crush, and mash vegetables,
and fruit for baby food, soups and
sauces.
Minimum
Medium to
Maximum
Maximum
Medium to
Maximum
7
Assembly and Use
of Blending Rod or Wire Wisk
1 Ensure the motor base is unplugged.
Attach blending rod or wire whisk to motor
base by holding the motor base with the
arrows slightly to the right or left of the
arrows on either attachment. Turn the
motor base while holding the blending rod
firmly until the attachment snaps into
place. (see figures 1 and 2)
2 Place food in suitable container for mixing
(beaker, bowl, or stockpot). For best results
solid foods should be no larger than
1/2" cubes.
3 Plug into 120-volt 60 Hz AC only outlet.
4 Immerse the blending rod or whisk into
your ingredients. Turn the speed selector to
“MIN”, press the ON/Turbo switch to begin
blending; then gradually increase speed,
as needed. (see figure 3) Slowly move
the rod up, down and sideways through
the food . Note: Never lift the blending
rod or wire whisk attachment out of your
ingredients while the unit is running to
avoid splatter of your food.
Note: At any time during the blending
process, you can press the Turbo button to
increase the blender to its maximum speed
6 Do not operate the motor continuously
for more than one minute when using
the blending rod or wire whisk, simply
pulse the selected speed to your
desired consistency.
7 When you are finished, simply release the
ON/Turbo switch, unplug the motor base,
twist the selected blending attachment
while holding the motor base to remove.
figure 1
figure 2
figure 3
TSCDIST_ImmBlderManual 10/16/07 12:10 PM Page 7