weber 42090 - Manual (Page 46)

E-4
Maintenance
(a)
(b)
(b)
11. Lift and twist the burner assembly slightly, to separate
the Crossover
® tube (a) from the burners (b).
12. Remove the Crossover ® tube.
13. Pull the selected burner(s) tube(s) from manifold
frame and replace with a new burner tube.
14. To reinstall the manifold assembly, reverse steps 7
through 13.
ƽCAUTION: The burner openings (1) must be
positioned properly over the
valve orifices (2).
(2)
(1)
Check proper assembly before fastening manifold in
place.
ƽWARNING: After reinstalling the gas lines, they
should be leak checked with a soap and water
solution before using the grill. (See, “Check for gas
leaks.”)