Windsor Portable Machine WindHandler 3 - Manual (Page 2)

Technical Specifications
Windsor Industries manufactures a full
line of innovative floor maintenance
equipment including:
• Carpet Extractors & Chemicals
• Vacuum Products
• Floor Scrubbers and Sweepers
• Floor Machines and Burnishers
Performance
Features
Specifications are subject to change without notice.
A-401 © 2005 Windsor Industries, Inc.
All rights reserved.
1351 W. Stanford Ave.
Englewood, CO 80110 USA
www.windsorind.com
800-444-7654
• A selection of three air
movement speeds provides
maximum performance
needed for each job.
• Built-in carpet clip makes
it easy to dry floors
under carpets.
• Airmover 3 offers three
standing positions to
allow air to be directed
at different angles.
Model Number: AM3 WH3
Construction: Rotationally molded polyethylene
with molded offset handle and
cord wrap
Same
Motor: 0.5 hp (373 watts), continuous
duty, capacitor start, thermally
protected, with four-point mount
Same
Fan Wheel: 9.6” (24 cm) dia. x 9.1” (23 cm)
wide
Same
Fan Speeds: High – 1600 rpm Same
Medium – 1350 rpm Same
Low – 1050 rpm Same
Airflow: High – 3000 cfm (84 m3/min.) Same
Medium – 2500 cfm (70 m3/min.) Same
Low – 2000 cfm (56 m3/min.)
Same
Power Cable: 25 ft (7.6 m) 16/3 SJTW with
three-wire molded plug
Same
Electrical: 120 volt AC, 60 Hz Same
Dimensions:
Length
20” (51 cm) 22.8 (58 cm)
Width 16” (41 cm) 16” (41)
Height 18.8” (48 cm) 21.5 (55 cm)
Weight: 33.5 lbs (15 kg) 39 lbs (18 kg)
Approvals: UL Listed to U.S. and Canadian
safety standards
Same