Wagner SprayTech GA 400AL - Manual (Page 20)

GA 250AL_GA 400AL .
20



Œ
X

 
"?
OPERATING MANUAL
EDITION 07 /2005 PART NO. DOC0350941
5.3 START-UP
5.3.1 GENERAL RULES FOR HANDLING THE SPRAY GUN
➞ See SAFETY REGULATIONS in Chapter 2
5.3.2 PREPARATION
• Mount the spraygun on the automatic movement system.
• Connect material hose to the spraygun and the paint pump.
• Select and mount the required nozzle.
• Connect the air hose ø6 mm; 0.24 in / ø4 mm; 0.16 in for the control air to the air
connection of the spraygun.
• Visually check the permissible pressures for all the system components.
• Make sure that the spraying unit and all other conductive parts within the work area
are earthed
• Set material pressure approx. 250 bar; 25 MPa; 3626 psi or 400 bar; 40 MPa; 5800 psi
and use a suitable medium (solvent or water) to check that connections do not leak.
• Relieve spray gun and unit pressure.
Accessorie Suspension bolt
Part-No. 0350480
3)()??'"
7!2.).'
5NINTENTIONAL
"EFORE
AS
3)()??'"
#!54)/.
6ALVE
œ
COMPRESSION
œ