Part identification chart – Weider WEBE03320 User Manual

Page 5

Advertising
background image

5

M10 x 60mm Bolt (17)

M10 x 85mm Bolt (23)

M10 x 25mm Bolt (25)

M8 x 65mm Bolt (26)

M10 x 60mm Carriage Bolt (18)

M6 x 45mm Bolt (16)

M6 x 16mm Bolt (24)

M6 Washer (22)

M10 Nylon Locknut (19)

M8 Nylon Locknut (27)

M4 x 16mm Screw (28)

M8 x 25mm Bolt (29)

M10 Washer (20)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 11 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

Advertising