Whirlpool CES365H - Manual (Page 35)

35
PROBLEM
The Self-Cleaning cycle
will not work
PROBLEM
Nothing works
CAUSE
• The range is not plugged into a properly grounded live outlet with the proper
voltage. (See Installation Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
• The control knob is not set correctly. Push in the control knobs before
turning them.
• You have not turned the oven temperature control knob to a temperature
setting. (See pages 16-17, 20.)
• You have blown a household fuse or tripped a circuit breaker.
• The coil elements are not plugged in all the way (Model CES365H). (See
“Replacing” on pages 30 and 31.)
• You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
T
ROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you
still need help, see “Requesting Assistance or Service” on page 37.
R
ANGE DOES NOT WORK
The oven does not work
The surface cooking
areas will not work
W
HEN SELF
-
CLEANING YOUR OVEN
CAUSE
• You did not turn the oven control knob to CLEAN.
• The door is not closed all the way.
continued on next page