weber SUMMIT 41996 - Manual (Page 50)

E-4
Maintenance
Crossover ® Ignition System Operations
If the Crossover ® ignition system fails to ignite the LEFT
burner in a burner set, light the LEFT burner with a match.
If the LEFT burner lights with a match, then check the
Crossover
® ignition system.
• Check that both ignition wires(1,2) are attached
properly.
• Check that the Crossover ® ignition button is activating.
• Replace battery with a like brand battery.
• You should hear the igniter sparking.
If the Crossover ® ignition system still fails to light, contact
the Customer Service Representative in your region using
the contact information sheet provided with your manual.
Replace Igniter Batteries
Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove
igniter button and contact spring. Remove old battery and
replace with a new AA alkaline battery. Positive end(1) of
battery faces up as shown in illustration. Replace spring
contact(2) and screw igniter button(3) back down.
(1)
(2)