3 mb intelligent tweaker(m.i.t.), 39 - bios setup – GIGABYTE GA-MA790GP-UD3H User Manual

Page 39

Advertising
background image

- 39 -

BIOS Setup

2-3

MB Intelligent Tweaker(M.I.T.)

(Note) This item is present only if you install a CPU that supports this feature.

Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)

When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

MB Intelligent Tweaker(M.I.T.)

 Advanced Clock Calibratioin

[Press Enter]

HT Link Frequency

[Auto]

CPU Clock Ratio

[Auto]

CPU North Bridge Freq.

(Note)

[Auto]

CPU Host Clock Control

[Auto]

x

CPU Frequency (MHz)

200

PCIE Clock (MHz)

[Auto]

VGA Core Clock control

[Disabled]

x

VGA Core Clock (Mhz)

700

Set Memory Clock

[Auto]

x

Memory Clock

x3.33

677Mhz

DCTs Mode

(Note)

[Unganged]

 DRAM Configuration

[Press Enter]

******** System Voltage Optimized ********

System Voltage Control

[Manual]

SouthBridge Volt Control

[Normal]

SidePort Mem Volt Control

[Normal]

NorthBridge Volt Control

[Normal]

DDR2 Voltage Control

[Normal]

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

MB Intelligent Tweaker(M.I.T.)

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level

CPU NB VID Control

(µù)

[Normal]

CPU Voltage Control

[Normal]

Normal CPU Vcore

1.3500V

Advertising