The oven light, Emoving the oven door, He oven light – Whirlpool GR399LXG User Manual

Page 41: Cont, Caring for your range

Advertising
background image

41

CARING FOR YOUR RANGE

R

EMOVING THE OVEN DOOR

(

CONT

.

)

T

HE OVEN LIGHT

The oven light will come on when you open the
oven door.

To turn the light on or off when the oven
door is closed:

Press the oven light pad.

To replace the oven light:

1.

Unplug range or disconnect power.

2.

Remove the glass bulb cover in the back of

the oven by turning
it counterclockwise.

3.

Remove the light bulb from its socket.
Replace the bulb with a 40-watt appliance bulb.

LIGHT

4.

Replace the bulb cover by turning it clockwise.

5.

Plug in range or reconnect power.

NOTE: The oven light will not work during the
Self-Cleaning cycle.

Range

Front frame
hinge slot

2.

Hold oven door so that the top edge of each
hinge hanger is horizontal. Insert hinge hangers
into the front frame hinge slots.

3.

Rotate top of door toward range. Slide hinge
hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully seated
and engaged on the support pins.

4. Insert the door stop clip with the angular surface

at the top of the frame hinge slot, then push in
the bottom of the clip until flanges are flush with
the front frame.

5.

Open the door completely and remove the door
removal pins. Save door removal pins for future
use.

6.

Close the door.

Door removal
pin hole

Hinge
hanger

Door stop
clip

Angular
surface of
door stop
clip

Door removal
pin hole

Support pins

Advertising