Part identification chart – Weider WEBE12621 User Manual

Page 16

Advertising
background image

M8 x 58mm Bolt (38)

M10 Washer (6)

M8 Nylon Locknut (73)

M10 Nylon Locknut (11)

M10 x 180mm Bolt (35)

M10 x 68mm Bolt (31)

M6 Washer (36)

M8 Washer (41)

M10 x 58mm Carriage Bolt (32)

M4 x 16mm Screw (71)

M6 x 16mm Screw (30)

M6 Nylon Locknut (40)

M6 x 38mm Screw (37)

M10 x 72mm Bolt (70)

M10 x 47mm Bolt (24)

M10 x 86mm Bolt (59)

M10 x 75mm Bolt (66)

M10 x 78mm Bolt (67)

M10 x 19mm Bolt (60)

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-
attached.

PART IDENTIFICATION CHART

Advertising