Wayne-Dalton 9800 - Manual (Page 17)

Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.
To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com
17
INST
ALLA
TION
Top Brackets
Power Drill
7/16” socket
Driver
To install the l-shaped top brackets, align
the bottom holes in the top bracket base
with the second set of holes from the
endcap.
Fasten using (4) 1/4” - 14 x 5/8” self
tapping screws. secure the top bracket
slide to the bracket base loosely using (2)
1/4” - 20 x 5/8” carriage bolts and
(2) 1/4” - 20 flanged hex nuts. The bracket
will be tightened and adjusted in step 15.
Insert rollers into top bracket slide. Repeat
for other side.
10
(4) 1/4” - 14 x 5/8”
sElF TaPPING
sCREWs
TOP bRaCkET basE
TOP bRaCkET slIDE
(2) 1/4” - 20
FlaNGED hEx
NuTs
ROllER
TOP bRaCkET slIDE
TOP sECTION
TOP sECTION
TOP sECTION
(2) 1/4” - 20 x 5/8”
CaRRIaGE bOlTs
2ND sET OF hOlEs
FROM bOTTOM
2ND sET OF hOlEs
FROM bOTTOM
INST
ALLA
TION