Whistler XTR-430 - Manual (Page 5)

VG-2 Mode
See Option Select Mode to turn this feature
on/off. When a VG-2 signal is detected, the VG-2
alert is sounded and the display flashes “VG-2”.
After 3 seconds the audio is canceled and the
display no longer flashes. This cycle is repeated
if the VG-2 signal is detected again.
D
Du urriin ng g tth he e p pe erriio od d a a V VG G--2 2 ssiig gn na all iiss d de ette ecctte ed d,, a a
rra ad da arr ssiig gn na all cca an nn no ott b be e d de ette ecctte ed d.. However,
because the VG-2 alert has confirmed that a
patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust
your speed accordingly. Laser detection is not
affected while a VG-2 signal is detected. (See
page 16 for more information)
OPERATION OPERATION
11 13
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Abbreviated Power Up
Sequence, and VG-2 Mode. Press the Menu button to
enter Option Select Mode. When selecting options, the
Dark or Quiet buttons must be pressed within 20
seconds or Option Select Mode will automatically be
exited.
Press and hold Menu button to exit Option Select Mode.
OPERATION
12
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts
off the detector after 3 hrs. The timer is reset if the
detector is turned off, unplugged or any button is
pressed before the timer has expired. The detector
will alert you with an audible and visual warning
before it shuts off. During this warning, you can
momentarily reset the timer by pressing any button.
If the unit has automatically turned off, press any
button to turn the unit back on.
Refer to “Option Select Mode” for instructions
for deactivating battery saver mode feature.