Watts Radiant Thermostat - Manual (Page 7)

6
Set CLOCK menu :
Use this menu to adjust the MILUX clock to the actual time.
use
+/ - to
Press use
+/ - to
Press use
+/ - to
Press
adjust minutes
OK
adjust hours
OK
adjust days
OK
PROGRAM menu : By pressing
+ or - key the Program number start to blink,
and use
? ?
to see the
then use
+/ - to
other days in the program
select program
Shows the daily program
If you select a built-in program to and press
OK
this program will be followed in
If you select an user program to and press
OK
you will enter the USER PROGRAM EDITION.
USER PROGRAM EDITION : Current blinking cursor position hour
The
+ key sets temperature at the current blinking program hour
The
- key sets temperature at the current blinking program hour
Use
? ?
keys to slide the blinking cursor position in the day and modify or correct easily the program
When the displayed day is correct press
OK
to jump to the following day. When you press
OK
on the last
day you will exit the User program edition and return to the top menu.
Now your user program will be followed if you put the MILUX in automatic operating mode .