Wacom 21UX - Manual (Page 63)

Appendix
Page 61
OPTIONAL DISPLAY CONFIGURATIONS
After mounting the pen display unit on the Cintiq stand, you can rotate the pen display to a variety of
positions. If you do not plan to rotate the Cintiq and want to fasten it more securely to the stand,
install the rotation lock screws as shown below.
To lock Cintiq to the display stand:
• Rotate the pen display to the standard landscape position (with power switch located at top of
unit).
• Two holes in the stand will line up with two screw holes on the Cintiq unit.
• Use a Phillips-head screw driver to insert the lock screws and hand-tighten them.
Lock screws
Avoid placing excess physical pressure on the Cintiq stand;
doing so can damage the stand.
Caution