Specifications – Wharfedale USX 800 User Manual
Page 2
Wharfedale International Limited, IAG House, Sovereign Court,
Ermine Business Park, Huntingdon, Cambs, PE29 6XU, England
www.wharfedalepro.com
The information in this brochure is subject to change without notice. All rights reserved © 2007 Wharfedale Pro Division Wharfedale is a member of the International Audio Group
specifications
usx preliminary specifications
Housing Material
Aluminium Extrusion
Oscillation Mode
PLL Synthesized
Carrier Frequency Range
UHF 529-865 MHz
Stability
+/- 0.005% (-10/50C)
Frequency Adjustment
Autmatic Channel Settiing
RF Output Power
>10dmW
Spurious Emissions
+/-55dBc
Maximum Deviation Range
+/-68KHz
Maximum Input Level
140dB SPL
Battery
1.5V (AA) x 2
Signal to Noise Ratio
>105dBA
Total Harmonic Distortion
<0.5%@1KHz
Frequency Response
50Hz-18KHz +/-3dB
Functional Distance
>100 metres (open area distance)
Main Frame Size
EIA Standard 1/2 rack unit
Channels
Single Channel
Receiver Module
True Diversity
Oscillation Mode
PLL Synthesised
Carrier Frequency Range
UHF-680-806MHz
Stability
+/-0.005% (-10-50C)
Bandwidth
13MHz
Sensitivity
2u V (S/N>12dB 25KHz deviation)
Frequency Interval
250KHz
Available Frequencies
50
Squelch Innovative
Noise Lock Dual Squelch Circuit
Maximum Output Level
MIC Level -14dBV/100 Ohm, Line Level -
4dBV/5K Ohm
Output Connectors
XLR balanced & 1/4”/6.3mm unbalanced
phone jack
AC Power Supply
External 90-260 VAC
DC Power Supply
1A, 12-15VDC
Dimensions : Inches/mm
1.7” H x 8.6” Wx6.3”D/ 44 H x 220 W x 160D