Remove control panel and front panel, Check for gas leaks, Ƽwarning – weber 600 User Manual

Page 9

Advertising
background image

9

Front edge of the
control panel

Put your fingers under the front edge of the control panel
and lift up and pull evenly toward you. Figure 18 (a).

The control panel is separate from the front panel. The
control panel needs to be removed before the front panel
can be removed. Figure 17.

Pull the front panel up and out of the cooking box
assembly. Figure 19.

Figure 16

Figure 17

Figure 18

(a)

Figure 19

Burner control knobs

Ignition button

Front Panel

Control Panel

Front panel

Control

panel

Front

panel

ƽ

WARNING

This gas connections of your Weber Gas
Barbecue have been factory tested. We do
however recommend that you leak check all
gas connections before operating your
Weber Gas Barbecue.

CHECK FOR GAS LEAKS

Remove control panel and front panel

Take off all 4 (Summit 400) or 6 (Summit 600) burner
control knobs.

Pull up on the ignition buttons until they stay in the up
position. Figure 16.

Advertising