GIGABYTE GSmart G1345 - Manual (Page 14)

G1345│ 1-6
To remove the memory card
1. For safe removal, tap Application Drawer >
Settings > Storage > Unmount SD card.
2. Push the memory card down to eject it from the
slot.
1.3 Charging the Battery
When you take your phone out from the box for
the first time, the battery is only partially charge.
Please charge the battery fully before use.
1. Connect the USB cable to the AC adapter, and
then, connect to the device via the USB cable.
2. Plug the AC adapter to an outlet to start
charging.
NOTE:
• The battery can also be charged when you
connect your phone to the computer.
• To ensure safety, do not remove the battery
from the phone while the AC adapter is
connected or while it is being charged.
1.4 Turning the Phone On or Off
After installing the SIM card and charging the
battery, you are now ready to turn on your phone.
To turn on your phone
Press and hold the power button until the phone
vibrates.
To turn off your phone
1. Press and hold the power button for several
seconds.
2. A pop-up window appears, and then, tap Power
off.
3. Select OK to confirm.
To set your phone to the sleep mode
To set your phone to the sleep mode, press the
power button briefly. It will turn the display off. To
turn the display on, press the power button briefly
again.