Part identification chart – Weider XP400 831.15392.2 User Manual
Page 20
M10 Nylon Locknut (76)
M8 Nylon Locknut (65)
M6 Nylon Locknut (69)
M8 Flange Nut (19)
M8 Washer (59)
M10 Lock Washer (68)
M6 x 13mm Bolt (92)
M4 x 16mm Screw (62)
M4 x 19mm Screw (77)
M4 x 12mm Flat
Head Screw (85)
M10 x 25mm Button
Head Screw (87)
M8 x 19mm Button
Head Screw (86)
M10 Nut (47)
M4 x 5mm Screw (8)
M10 x 53mm Carriage Bolt (61)
M10 x 42mm Button Head Bolt (71)
M10 x 50mm Bolt (63)
1/4” x 45mm Screw (58)
1/4” x 16mm Screw (82)
M10 Washer (75)
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST on the reverse side of this page.
Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
If a part is missing, call toll-free 1-877-992-5999.