Install the bottom tray, Install the lid – weber 3000 LX User Manual

Page 19

Advertising
background image

19

Step 18

Install the lid

You will need: lid, two hinge pins and two hair pin cotters.

Set the lid in place. Align the hinges at the rear of the
barbecue. Insert hinge pins from the outside. Insert hair pin
cotters into the small holes in the hinge pins. Figure 24.

Figure 24

Hair pin cotter

Hinge pin

Step 17

Install the bottom tray

You will need: bottom tray, catch pan holder, catch pan and
one drip pan.

Figure 22

Figure 21

Figure 23

Bottom tray

Finger grip on front
edge of bottom tray

Finger grip

Front side of catch
pan holder

Put the foil drip pan into the catch pan.

Slide the catch pan into the catch pan holder with its finger
grip towards you.

Slide the bottom tray onto the mounting rails under the
cooking box with finger grip toward you. Figure 23.

ƽ

CAUTION: Do not line bottom tray with aluminum foil.

It can cause grease fires by trapping the grease and not
allowing grease to flow into the catch pan.

Hook the ends of the catch pan holder into the hole in the
bottom tray. Figure 22. The front of the catch pan holder
must be on the same side as the finger grip of the
bottom tray.

Advertising