Wolf DO30F - Manual (Page 5)

Planning Information
L Series Built-In Double Ovens
M O D E L S D O 3 0 F A N D D O 3 0 U
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
For ease of installation, Wolf recommends
using a 33" (838) wide cabinet with the L Series
double oven. You will need a minimum 24"
(610) of usable cabinet depth. The cabinet base
platform must be able to support 400 lbs
(181 kg).
Wolf L Series built-in ovens have a face trim
on all four sides and will overlap stiles and rails.
The trim overlaps
1 / 8 " (3) on the bottom, 3 / 16 "
(5) on the top and 3 / 4 " (19) on each side.
L Series double ovens require a separate,
grounded 4-wire 240/208 V AC, 60 Hz, 50 amp
service with its own circuit breaker. It is
provided with a 5' (1.5 m) flexible 4-wire
conduit for connection at the electrical supply.
IMPORTANT NOTE: Unless you are using
cabinets deeper than 24" (610), it is recom-
mended that the electrical supply be placed in
an adjacent cabinet within reach of the conduit.
Refer to the illustration on page 4 for location
of electrical supply.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
The Wolf L Series double oven may be
installed in combination with a Wolf warming
drawer with L Series stainless steel drawer
front or integrated drawer front. For additional
specifications, refer to the warming drawer
section of our website, wolfappliance.com.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.