Winegard RD-9946 - Manual (Page 37)

37
Model RD-9900 PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
EDIT MENU
1. Press UP/DOWN arrow
buttons to get Manual Move
on screen
Figure 29
NOTE: All commands will be shown in bold with brackets, example
[SELECT A].
This Edit Menu allows you edit/perform the following functions: Select and edit
the search satellite, return system to factory defaults, access the test functions
menu, and display the system type and software version. To access the Edit
Menu, proceed as follows:
1. Press [UP/DOWN] arrow until Edit is displayed on positioner. See Figure
29.
2. Press [SELECT A or B] Edit, see Figure 29.
2. Press SELECT A or B as
appropriate
Edit
Search DSS
Model RD-9900 PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
Figure 30
3. Press UP button until
3000 is displayed
4. Press SELECT A to enter
code
Enter Code: 3000
3. Press [UP] arrow button until positioner display shows 3000. See
Figure 30.
4. Press [SELECT A] Enter Code: 3000 to access Edit Menu. See Figure
30
NOTE: To exit Edit Menu, press [DOWN] arrow key, then [SELECT B] Quit
to exit Edit Menu.