Wenger Battalion Diver III - Manual (Page 7)

6
Setting the Time and Date on Standard Watches
(see Table of Contents on p.1 for other watches)
Important note: If the crown of your watch does not pull directly out or if
your watch is water-resistant to 200m, then you may have a watch with a
screw-down crown. Rotate the crown counterclockwise until the crown moves
away from the watch. This will set the crown in Position 1. Always screw down
the crown after making any adjustments. This is very important as the screw-
down crown assures water resistance.
Position 1 Position 2 Position 3