Wherify Wireless Wherifone G500 Series - Manual (Page 19)

13
Ring Mode
The Ring Mode icon indicates that the Wherifone is set either to “Ring
Mode” or “Vibrate Mode.” Set this mode using the Menu function. In
Ring Mode the Wherifone will alert the user to an incoming call via the
ring tone selected by the user. When the phone is in Vibrate Mode the
phone will vibrate to alert the user to an incoming call.
Lock
The Lock icon indicates that the Wherifone keypad is locked. The Lock
icon will only appear when the keypad has been locked using the Menu
function. If the keypad is locked you may temporarily unlock it by holding
down on the menu/OK button for three seconds. The keypad will
automatically re-lock one minute after you’ve completed your call or
locate. The SOS button will work even if the keypad is locked.
GSM NETWORK SIGNAL STRENGTH ICON
NO BARS NO SIGNAL ON GSM NETWORK
ONE BAR VERY LOW OR WEAK SIGNAL ON THE GSM NETWORK
TWO BARS LOW SIGNAL ON THE GSM NETWORK
THREE BARS MEDIUM SIGNAL ON THE GSM NETWORK
FOUR BARS MEDIUM HIGH SIGNAL ON THE GSM NETWORK
FIVE BARS HIGH SIGNAL ON THE GSM NETWORK
G500Series UG_R5.qxd 7/18/06 1:54 PM Page 13