Western Digital My Book Mirror Edition - Manual (Page 13)

MY BOOK MIRROR EDITION
USER MANUAL
SETTING UP – 10
8. Click Accept to accept the license agreement and continue with the installation.
9. Click Quit.
10. Connect the adapter’s DC cable plug to the DC power input at the rear panel of
the product. Verify that plug type of your wall power adapter is the correct plug
type for your region. If incorrect, remove it and install the correct one.
11. Connect the wall adapter to your AC power receptacle.
12. Plug one end of the USB interface cable into an available port on your computer.
13. Plug the other end of the interface cable into the device.
14. The unit will power up and mount to the system, and WD Drive Manager will
appear in the status menu. click the WD Drive Manager menu extra icon and point
to WD My Book. Click Launch WD RAID Manager.