Weider WESY99300 - Manual (Page 25)

Note: Assembly is divided into four stages: 1) frame assembly; 2) arm assembly; 3) cable and pulley
assembly; and 4) seat assembly. The hardware for each assembly stage is packaged separately. Wait
until you begin each stage to open the parts bag for that stage.
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. Important: Some parts may have been pre-assembled for
shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled.
R0501A