Williams Sound Defender 16P-3001-103 R-T - Manual (Page 5)

CMOS RAM DIAGNOSTICS – TEST 3
From RAM Diagnostics depress ADVANCE in AUTO-UP.
RESULT
CRT
INDICATION
LED INDICATION FAULTY AREA
PASS
CMOS RAM TEST
PASSED
¡¡ l ¡
3 rd LED blinks
twice.
-
FAIL
CMOS RAM
FAILURE
¡¡ l ¡
3 rd LED lights.
CMOS RAM 1E memory
protect gates 4J, 6H, or
address decoder 4K, 5P.
CMOS
INTERLOCK
FAILURE
¡¡ l ¡
3 rd LED lights.
Coin door interlock,
Memory protect gates 5B,
6H,4J, OR CMOS RAM 1E
COLOUR RAM TEST – TEST 4
From CMOS RAM test depress ADVANCE in AUTO-UP.
FAULT COLOUR
SEQUENCES RAM 2C RAM 1C
1 LIGHT RED
2 RED
3 DARK RED Band of red
intensity variance
or washout Band of magenta
4 LIGHT GREEN
5 GREEN
6 DARK GREEN Band of yellow Band of cyan
7 LIGHT BLUE
8 BLUE
9 DARK BLUE Band of magenta Band of blue
intensity variance
or washout
4 LIGHT GREEN Band of green Band of dark green
or washout
5 GREEN Band of light green Band of faint
green, Band of
darker green
6 DARK GREEN Band of washout
CRT SEQUENCES THROUGH 8
COLOURS, 2 SECONDS EACH
VERTICAL BAND INDICATES
COLOUR RAM FAULT.
¡¡¡ l
4 TH LED REMAINS LIT
DURING TEST
Note that a blank sequence or two sequences with same
shade indicate 2C or 1C RAM or color analogue circuit
faulty.
Tests 5 and 7 provide sequential subtests. To stop automatic cycling set switch to
MANUAL/DOWN. Depress ADVANCE in MANUAL-DOWN to step through subtests.
SOUND TEST – TEST 5
From Color RAM test, depress ADVANCE in AUTO-UP.
Test sequences sounds 1 through 31, skipping 19, 27, and 28.
Missing Check
1 2P4/10P3 Pin 3
2 2P4/lOP3 Pin 2
4 2P4/10P3 Pin 5
8 2P4/10P3 Pin 4
16 2P4/10P3 Pin 7
All Perform Sound Board Diagnostics