Deck secured in tilt-up position, Assembly instructions – Walker MDD (20.9 HP) User Manual

Page 28

Advertising
background image

Assembly Instructions

24

CHECK HYDROSTATIC TRANSMISSION OIL

LEVEL

Refer to LUBRICATION for Checking Hydrostatic
Transmission Fluid
Level in

Maintenance Instruc-

tions

.

CHECK BATTERY ELECTROLYTE LEVEL

Refer to CHECKING/SERVICING the Battery in

Maintenance Instructions

.

CHECK FUNCTIONS OF INSTRUMENT PANEL

AND WARNING HORN

Turn the ignition key to the RUN position. Voltmeter,
Oil Pressure Warning Light, and Warning Horn
should all operate, indicating normal function.

CHECK TIRE PRESSURE

Deck Caster Wheel = 20 PSI (137 kPa)
Drive

= 15 PSI (103 kPa)

Rear

= 20 PSI (137 kPa)

CHECK AND CLEAN GRASS BUILDUP
UNDERNEATH MOWER DECK (and inside
GHS blower, if equipped)

Refer to CLEANING the GHS Blower in

Mainte-

nance Instructions

for blower cleaning information.

The tilt-up deck can be secured in the raised position
by unlocking the deck lock levers on each side of the
carrier frame and inserting the deck hook into the tilt-
up latch on the tractor body. Before operating the
tractor, make sure to re-engage the deck lock levers
after lowering the deck to the normal operating po-
sition.

Deck Secured in TILT-UP Position

CHECK MOWER BLADE CONDITION, SHARP-

NESS, AND SECURITY OF MOUNTING

The blade mounting nut should be tightened to
60 ft-lb (81.3 N·m). If blade sharpening is required,
refer to CHECKING/SERVICING for Sharpen
Mower Blades
in

Maintenance Instructions

.

ADJUST MOWER CUTTING HEIGHT, IF RE-

QUIRED

Position the hitch pins in the four deck support pins.
Refer to the “Cutting Height Adjustment” decal on
the deck gearbox cover.

PERFORM ANY ADDITIONAL PROCEDURES

called for on the MAINTENANCE SCHEDULE
CHART
in

Maintenance Instructions

.

DANGER

Never operate cutter blades with deck in
raised position because it is hazardous.

CAUTION

Do not operate machine with deck tilt-up
pivot joint unlocked.

DANGER

Do not operate the mower with deck in tilt-
up position. Do not move the tractor with
the deck in the tilt-up position.

Tilt-Up Lift Handle

Tilt-Up

Latch

Deck Lock Lever

Tilt-Up Latch

Tilt-Up Hook

on Deck

Advertising