Weider 831.150460 - Manual (Page 6)

ADJUSTING THE PIVOT LEG
To change the position of the Pivot Leg (2), remove the
“L” Pin (15). Align the other set of holes in the Pivot Leg
and the Frame (1). Re-insert the “L” Pin.
ADJUSTING THE LEVEL OF THE BENCH
To change the level of the Bench (12), remove both
Lock Pins (11) from the Frame (1) and Adjustment Leg
(3). Align the set of holes in the Frame with another set
of holes in the Adjustment Leg. Re-insert the Lock Pins.
Always use both Lock Pins.
ADJUSTING THE WEIDER PRO 120
The weight bench is designed to be used with your own weights (not included). The steps below explain how the
weight bench can be adjusted. Refer to the accompanying exercise poster for exercise information.
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
2
1
1
15
11
12
3
6