Westinghouse 42-w2 - Manual (Page 15)

13
English
4. Connect power cables
Connect the power cord to the HD Monitor then to a properly grounded AC outlet.
5. Turn Power On
Press the Power ON button on the right side of the HD Monitor, or press the Power ON
(Red) button on the remote control.
6. Select input source for the HD Monitor using the OSD menu or
remote control
7. If connecting to a PC (VGA/DVI1/DVI2):
For the best picture quality, set the HD Monitor resolution to 1920 x 1080 at 60Hz
(refer to the graphic card’s user guide to set this resolution).