Etting the controls, Cont, Using the self-cleaning cycle – Whirlpool F195LEH User Manual

Page 27

Advertising
background image

27

To delay the start using delay start time:

1.

Press AUTO CLEAN.

This will automatically set a 3

1

2

-hour Self-

Cleaning cycle.

NOTE: There will be a 30-minute cool-down

1

2

hour before the cycle is over.

2.

Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter
than 3

1

2

hours, use the Hour and Minute pads to

set the cleaning time you want. Press the “up” (s)
or “down” (t) pad(s) until a time between 2

1

2

-4

1

2

hours shows on the display.

Use 2

1

2

hours for light soil.

Use 3

1

2

-4

1

2

hours for average to heavy soil.

3.

Press DELAY START TIME.

4.

Set the start time.

Press the “up” (s) or “down” (t) pad(s) until the
correct time shows on the display. The oven will
automatically come up with the stop time by
adding the set cleaning time to the set start
time.

5.

Press START/ENTER.

The door will lock as soon as you press
START/ENTER.

6.

After the Self-Cleaning cycle starts:

7.

After the Self-Cleaning cycle ends:

LOCKED goes off and the door unlocks.

NOTE: The stop time will be the start time plus
the cleaning time.

S

ETTING THE CONTROLS

(

CONT

.

)

PRESS

YOU SEE

AUTO

CLEAN

CLEAN
TIME

PRESS

YOU SEE

(example for 4

1

2

-hour cycle)

HR

MIN

CLEAN
TIME

PRESS

YOU SEE

DELAY

START

TIME

START

CLEAN
TIME

HR

MIN

START

CLEAN
TIME

(example for 2:30 start time)

PRESS

YOU SEE

START

ENTER

5 SEC

ON

DELAY

CLEAN

YOU SEE

ON

HEAT

D

TIME

CLEAN
TIME

LOCKED

YOU SEE

CLEAN

PRESS

YOU SEE

USING THE SELF-CLEANING CYCLE

continued on next page

Advertising