Residue or lint on load, Tearing, Stains on load – Whirlpool 3950310 User Manual

Page 15: Load is wrinkled, Ommon, Washing, Problems, Cont, Troubleshooting

Advertising
background image

15

C

OMMON

WASHING

PROBLEMS

(

CONT

.

)

Solution ...

•

Sort lint givers (towels, chenille) from
lint takers (corduroy, synthetics). Also
sort by color.

•

Lint can be trapped in load if over-
loaded. Wash smaller loads.

•

Clean out pockets before washing.

•

Use enough detergent to hold
lint in water.

•

Use wash water warmer than 70°F
(21°C).

•

Use wash water warmer than 70°F
(21°C).

•

Loads should move freely during
wash. Wash smaller loads.

•

Do not pour chlorine bleach directly
on load. Wipe up bleach spills.
Undiluted bleach will damage fabrics.

•

Clean out pockets before washing.
Zip zippers before washing.

•

Mend rips and broken threads in
seams before washing.

•

Dilute fabric softener and add to rinse
portion of cycle only. Do not drip
fabric softener on clothes.

•

Install an iron filter.

•

Use enough detergent to remove soil
and hold it in suspension.

•

Sort dark clothing from whites and
lights.

•

Unload the washer as soon as it
stops.

•

Unload the washer as soon as it
stops.

•

Use the Permanent Press cycle or
another cycle with low spin speeds to
reduce wrinkling.

•

Loads should move freely during
wash. Wash smaller loads.

•

If safe for fabric, use warm or hot
wash water. Use cold rinse water.

•

Reverse hoses.

Cause ...

•

Improper sorting.

•

Overloading.

•

Paper or tissue in pockets.

•

Not enough detergent.

•

Detergent not dissolving.

•

Wash water colder than 70°F (21°C).

•

Overloading. Improper use of washer.

•

Improper use of chlorine bleach.

•

Sharp items not removed from pockets;
fasteners not fastened.

•

Items damaged before washing.

•

Improper use of fabric softener.

•

Iron (rust) in water.

•

Not enough detergent used, causing soil
to be redeposited.

•

Dye transfer due to not sorting loads
properly.

•

Dye transfer due to not unloading
washer promptly.

•

Not removing load promptly.

•

Wrong cycle for fabrics being washed.

•

Overloading.

•

Wash water not warm enough to relax
wrinkles. Using warm rinses.

•

Hoses reversed.

TROUBLESHOOTING

Problem ...

Residue or lint
on load

Tearing

Stains on load

Load is wrinkled

continued on next page

Advertising