Winegard WB-2000 - Manual (Page 7)

5
.4 Satellite Interface Components
HDTV Satellite Interface
User interface for the HD Satellite Interface. Using this panel, the user can select the
satellite service provider, choose the toggling pair for DirecTV, control satellite antenna in
manual mode and many more features. Interface also provides 12VDC power to satellite
antenna.
Power Button
Switches the Interface
Box and Satellite Dish
ON and OFF
LCD Display
Shows current status
of satellite system
Select Button
Changes
selection in
interface
menu
Enter Button
Confirms selection in
interface menu
DirecTV 0°W HD Converter
Required for DirecTV only. Satellite 110°W provides most of the High Definition con-
tent. When satellite 110°W is selected, the HD Converter converts the signal to a frequency
that can be read by your DirecTV High Definition receiver.
(110°) HD CONVERTER
MODEL WB-1100
WINEGARD COMPANY • BURLINGTON, IOWA
TO RECEIVER
TO INTERFACE/DISH TO CONTROL
Made in USA
.5 Accessing the Main Menu
You can access the Satellite Interface Main Menu at any time using the following steps.
[BUTTON] denotes a button to be pushed on the Satellite Interface front panel, and words
in Bold represents options on the LCD screen. The *Asterisk onscreen denotes the current
selection.
1. Press and Hold [ENTER] button for 2 seconds.
2. Press [SELECT] to choose Yes.
3. Press [ENTER] to confirm selection. You will now be in the Main
Menu.
Satellite Interface
POWER SELECT ENTER