Wagan Bluetooth wireless handsfree car kit 2444 - Manual (Page 5)

USER’S MANUAL — Please read before using this equipment.
© 2007 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
9
Multifunction Key.
3. To receive the incoming call and end the active call, click the
Multifunction Key once.
4. To switch to the incoming call, press & hold the
Multifunction Key for 2 seconds. The LCD screen will display
'Call Hold'.
5. To switch back to the call on hold, press & hold the
Multifunction Key for 2 seconds again.
Transfer call from hands
free to the phone
During a call, press & hold Multifunction Key for 5 seconds.
LCD displays ‘BLUETOOTH’. To transfer back to the device,
press and hold once again.
Redial the last number
In standby mode, press Multifunction Key twice. The last
number will be redialed. LCD displays ‘Dialing’.
Voice dial
In standby mode, press Multifunction Key once. The LCD will
display ‘Voice Call.’ You will hear a tone from the hands free.
It indicates the mobile phone is ready to receive voice tag.
Speak the name of the person you wish to call. Then the mobile
starts the voice dial automatically.
(Ensure the mobile phone supports Voice Control Dialing
before use.)
Mute microphone
To temporarily mute the microphone, click together the volume
‘^’ or ‘v’ buttons once. You will hear a ‘do’ sound. This will
allow you to hear the other side but the other side does not hear
you. Press ‘^’ or ‘v’ again to un-mute.
Adjust volume
Press ‘^’ or ‘v’ buttons to control volume up or down. LCD
displays the volume level.
Privacy call
Connect external headphone to the hands free device. This will
allow you to hear the other side but the other people inside the
car will not be able to hear.
Disconnect with mobile
In standby mode, press & hold the ‘^’ for 2 seconds. This
function is for connecting the hands free to another mobile.
LCD displays ‘BLUETOOTH’. To reconnect to the phone,
click the Multifunction Key once
* The Functions ‘Caller ID display’, ‘Redial the last number,’ ‘Call waiting’ and
‘Call transfer’ are supported by Hands free Profile instead of Headset Profile. For
using those functions, please check if the mobile phone supports Hands free
Profile.
* The Function ‘Volume Level Display’ is available if the phone supports ‘Remote
Volume Control.’
Bluetooth Wireless Handsfree Car Kit
By Wagan Tech
www.wagan.com
10
In- Car Use
Office or Home Use
Care and Maintenance
• Check the laws and regulations on the use of mobile phones and hands free
equipment in the area where you drive.
1. Inside the car, clip the provided
bracket to the sun visor as
shown.
2. Fit the hands free on the
bracket.
3. To flip the hands free up or
down, slack the screw of the
bracket gently.
4. After the hands free has
adjusted to a comfortable view
angle facing you, lock the
screw.
5. Slide out microphone to switch
on. For the best performance,
extend the microphone fully.
1. Put the hands free on the desktop.
2. Put it on a flat surface.
3. Slide out microphone to switch
on. For the best performance,
extend the microphone fully
.