Whistler 3500 - Manual (Page 9)

Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep, the
closer or stronger the radar source. Example:
1 = weak signal, 9 = strong signal
Pulse Protection ®
When a pulse type signal (instant-on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display reads:
After 3 seconds the standard alert pattern resumes.
RADAR ALERT
15
OPERATION
14
10th time Ka ON D = ON Turns Ka Band ON
C = OFF Turns Ka Band OFF
11th time Laser ON D = ON Turns Laser ON
C = OFF Turns Laser OFF
12th time Voice OFF D = ON Real Voice ® ON
C = OFF Real Voice ® OFF
13th time DSP NOR D or C Normal
Vertical
Reversed
*Factory settings.
Press and hold P/V to exit. NOTE: Turning POP ™ Mode off, turns
on VG-2.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and release.
Display shows:
• Press P/V to exit.
Voice Module Port
Allows you to use an optional Whistler Voice Module.
(See accessory page for ordering and option mode for
programming). Any other device may damage the unit
and void your warranty. When mute or auto quiet modes
are engaged, the audio will be cancelled to the voice port.