Wright Manufacturing 52083 - Manual (Page 18)

14
Critical Application Models
Thread
Locker
Torque
Range (ft-lbs)
Wheel motor bolts (Securing
motor to support)
Stander RH / Sport RH Loctite 2760 40-50
Clutch to engine shaft All Models Loctite 2760 50-55
Wheel hub to wheel motor Stander RH / Sport RH (12P) N/A 138-158
Wheel lug nuts All Models N/A 80-90
Split Hub (Spindle & Drive) (Gr 8) All Models N/A 13-17
Blade Bolts All Models N/A 70-80
Torque Specifications
Fuel Evaporation System
All Wright Stander RH’s need to have this mandatory feature.
•
Do Not alter or remove.
•
Do Not fill past the “Max Fill Level” line shown in Figure.
•
Over-filling could result in clogging the roll-over vent and/or contaminating the purge canister.
•
The vapor canister is located under the dash.
•
Inspect and clean dust filter every 500 hrs or annually.
Dust Filter
Vent /
Purge To
Tank