Wacom CINTIQ 15X - Manual (Page 16)

14
LCD Display Cabling Diagram
Cintiq, rear view
DC Input
Analog
Digital
DVI to DVI cable
Or...
VGA to DVI cable
DVI-I connector
Do not attach the
USB or serial data
cable until instructed
to do so.
Video card
DVI or VGA
Rear panel of your computer
Power Supply To AC Outlet
CAUTION Do not use any cable that did not come with Cintiq; use of an improper cable may
damage the unit.
Make sure that you correctly set the Cintiq Digital/Analog (DVI/VGA) switch
for the video card you are using.
Do not connect or disconnect the video or power cables while Cintiq or your
computer are turned on – this can damage the LCD display or computer video card.
Do not exceed a display refresh rate of 75 Hz – this can overheat the LCD display
and cause permanent damage.
C
A
B
D
Digital/Analog (DVI/VGA)
switch