Wolfgang Puck BIBC1050 - Manual (Page 4)

6
Assembly and Use
of Blending Rod
1 Ensure the Motor Base is unplugged.
Attach Blending Rod to Motor Base by
aligning the arrow on the Motor Base with
the unlock graphic on the blending rod.
Turn counterclockwise until the arrow on
the Motor Base aligns with the lock graphic
on the Blending Rod. (see figure 1)
2 Place food in suitable container for mixing
(beaker, bowl, or stockpot). For best results
solid foods should be no larger than
1/2" cubes.
3 Plug into 120-volt 60 Hz AC only outlet.
4 Immerse the Blending Rod into your
ingredients. Always start on Low Speed to
process your ingredients. If more power is
needed, simply press the High Speed
button. Slowly move the rod up, down and
sideways through the food . Note: Never lift
the Blending Rod attachment out of your
ingredients while the unit is running to
avoid splattering.
6 Do not operate the motor continuously
for more than one minute when using
the Blending Rod. Simply pulse to your
desired consistency.
7 When you are finished, simply release the
Speed Control Button, unplug the Motor
Base, twist the Blending Rod clockwise
to the unlock graphic and separate the
blending rod from the motor base.
figure 1
5
Know Your
Immersion Blender
Motor Base
Speed Control 1 - Low
Speed Control 2 - High
Blending Rod
SMImmBlderManual_09 6/25/09 6:04 PM Page 5