Installation – Westinghouse GHP17S User Manual
Page 7
7
480mm
560mm
*
Gas supply connection location
830mm
Gas supply connection location
*
480mm
Figure 4–60cm and 75cm models cut-out
Figure 4–90cm models cut-out
iNSTALLATiON iNSTRUCTiONS
This applia
nce must be installed by an authorised person
and in compliance with :
1. AS 5601 ‘Gas Installations’ (Australia) or NZS 5261
‘Installation of Gas Burning Appliances and Equipment’
(New Zealand) or the relevant installation code for
gas appliances of your country.
2. The local gas fitting regulations, municipal building
codes, electrical wiring regulations and any other
relevant statutory regulations.
3. The particular instructions as given below.
CAUTION
Cooktops are supplied for use with natural gas (NG).
To use on LPG the injectors MUST be changed using
the conversion kit supplied. Refer LP Conversion on
page 12.
4. A certificate of compliance MUST be given to the
customer after the appliance is successfully installed.
5. This appliance must be earthed.
iNSTALLATiON