Protocol, Public lan – Westell Technologies Westell UltraLine 7400 User Manual

Page 145

Advertising
background image

030-300381 Rev. A

145

January 2004

User Guide

UltraLine Home DSL Router (Models 7400, 7401)

belongs to your local network.

DHCP Start Address (If
DHCP is enabled for
Private LAN)

This setting specifies the start of the IP address pool that the Router uses to
assign IP addresses to local devices.

DHCP End Address (If
DHCP is enabled for
Private LAN)

This setting specifies the end address of the IP address pool used for automatic
configuration of local devices.

DHCP Lease (If DHCP is
enabled for Private LAN)

This setting specifies the DHCP lease time.


Protocol

Protocol

Protocol

This screen informs the Router which networking protocol to use when
communicating with your ISP. This information is provided by your ISP.


Public LAN


This screen contains the settings that control how the ADSL router interacts with the local devices connected to the
router. It is not recommended that these settings be changed. The following settings are displayed.

Public LAN

Public LAN DHCP Server
Enable

Dynamic Host Configuration Protocol (DHCP) is an Internet standard that
allows the ADSL router to automatically assign IP addresses to devices
connected on the LAN network. It is advised that this is enabled for Private
LAN.

Public LAN Enable

This setting enables the Public interface. This feature allows a global subnet to
exist behind your Router.

Modem IP Address

This controls the IP address that the ADSL router uses for local
communication.

Subnet Mask

This setting specifies the subnet mask to use to determine if an IP address
belongs to your local network.

DHCP Start Address (If
DHCP is enabled for
Public LAN)

This setting specifies the start of the IP address pool that the Router uses to
assign IP addresses to local devices.

DHCP End Address (If
DHCP is enabled for
Public LAN)

This setting specifies the end address of the IP address pool used for automatic
configuration of local devices.

DHCP Lease (If DHCP is
enabled for Public LAN)

This setting specifies the DHCP lease time.











Advertising
This manual is related to the following products: