Crossover ignition system operations – weber 900 LP User Manual

Page 32

Advertising
background image

Crossover Ignition System Operations

If the Crossover Ignition System fails to ignite the Front
burner, light the Front burner with a match. If the Front
burner lights with a match, then check the Crossover
Ignition System.

■

Check that both the white and black ignition wires are
attached properly. Figure 20.

Figure 20

White wire

Black wire

■

Check that the Crossover Ignition button pushes the
igniter (button) down, and returns to the up position.

■

Check to see if the igniter is loose in the frame.
Tighten if necessary; see Step “Install igniter” for
correct procedure.

If the Crossover Ignition System still fails to light, contact
Weber-Stephen Customer Service.

Advertising