Directv receiver setup – Winegard Carryout Automatic Portable Satellite TV Antenna GM-1518 User Manual
Page 6
Carryout Antenna 10
9 Carryout Antenna
DIRECTV Receiver Setup
If your receiver differs from the options shown, you may
need to consult your receiver manual. The wording and
display used in your receiver may differ slightly.
For more information on receiver compatibility and
programming, visit www.winegard.com/receivers.
For help, email [email protected] or call 1-800-788-4417
DIRECTV Receiver Setup
Disclaimer: Receiver setup instructions are accurate at time of printing and may change without
notice. Call Winegard tech line for assistance: 1-800-788-4417.
Select 3-LNB (18”x20”) or 3
Satellites. If given the option
of SWM or Multi-switch, select
Multiswitch.
Now power on the Carryout
antenna, and allow it a few
minutes to acquire signal.
If you want to check signal strengths, choose Signal Strength from the menu
options before returning to this screen.
Now, press Continue.
In your receiver menu, you will
need to identify the Satellite
Menu. Once there, find the
option for Satellite Setup.
Press Menu on your remote,
and then select Parental, Fav’s
&
Setup.
Select System Setup.
After pressing Continue, the
receiver will automatically verify
your setup.
You may be required to press the
DASH (-) before proceeding
(underneath #7 on the remote).
Continue with step 7 on the next page.
6
4
1
6
5
3
2