Wayne-Dalton TORQUEMASTER 46 - Manual (Page 23)

23
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
INST
All
ATION
Place vice clamps onto both vertical
tracks just above the third roller. This is
to prevent the garage door from raising
while winding counterbalance spring(s).
fAILuRE TO PLACE VICE CLAMPS
ONTO VERTICAL TRACk CAN
ALLOW DOOR TO RAISE AND
CAuSE SEVERE OR fATAL
INjuRy.
Securing Door
for Spring winding
TRACk
VICE CLAMPS
ATTAChED TO
INNER RAIL
Of TRACk
(2) Vice Clamps
23
PLACE VICE
CLAMPS ABOVE
3RD ROLLER
wARNINg